Directions for Using the Slide Show Template with Sound. 1. Copy this folder to your hard drive. Double-click on the copy of the folder. Select "Select All" from the Edit menu. Right-click on any one of the files and select "Properties" from the pop-up menu.Click on the "Read-only" box so that it is not checked and click OK. 2. Copy the graphic files (in jpg format) into the same folder. 3. Rename the graphics "p1.jpg", "p2.jpg", "p3.jpg", etc, in the order that they are to appear in the slide show. (If the graphics are not in JPG format, either use a graphics editor to change their format into JPG or change the graphic links on each html file to reflect the actual format of the graphics). 4. Edit the title page, "index.htm" in a text editor such as NotePad or SimpleText. Replace "Our Slide Show" and "Created by the students of ..." with your own titles. Save it. Note: To add more pages to the site, simply go to the last page, select Edit with Notepad, and INCREASE EACH NUMBER ON THE PAGE BY 1 (for example, change 30 to 31, 29 to 30, 31 to 32, etc). Save the page with a filename that is one higher, e.g. if it was "page30.htm", save it as "page31.htm". Repeat for as many pages as you need. 5. Attach a microphone to the microphone input on the back of the computer (marked with a microphone symbol). 6. Open the Windows sound recorder in Start --> Programs --> Accessories --> Entertainment --> Sound Recorder 7. Click on the round red button to begin recording. Click on the black square button to stop. 8. Select File --> Save to save the sound for slide 1 as "s1.wav", the sound for slide 2 as "s2.wav", etc. Save the sound files in the same folder as the other files. 9. Select File --> New to clear the old sound and repeat steps 7 and 9 for each slide that has a sound. 10. If you would like to add a caption to any of the slides, open the corresponding page (e.g. page1.htm, page2.htm, etc) in a text editor such as NotePad or SimpleText, type in the caption between the

and

tags, and Save. (If you don't have captions, you can skip this step and leave the files alone). 11. To run the slide show, open "index.htm" in a Web browser. Click on the arrows to move forwards and backwards. Note: If you are using downloaded sound files rather than recording your own sounds, open the corresponding slide file and change the name of the sound file (where it says in the HTML text for that page, so the sound controller won't show omn that page.